80kw Power Plant Solar Wind Diesel Inverter with Controller
Products Advantages
1. The main circuit use DSP chip which produced by American Tl Company, Japan Mitsubishi IGBT module, drive protection is Japan's Mitsubishi chip, off grid output use isolation transformer, safe and reliable .
2. Adopt SPWM pulse width modulation technology, pure sine wave output, power factor is close to 1, current harmonic content is low;
3. Inverter current closed-loop control, controllable and adjustable;
4. DC maximum power tracking technology (MPPT);
5. DC input voltage with wide range , adapting to different occasions;
6. With a full range of power protection and comprehensive self-detection and protection. When system failure the off-grid inverter will be stopped;
7. The circuit structure is compact and the maximum efficiency is >95%;
8. Optional RS485 communication, PC monitoring, remote data collection and monitoring.
Product appearance
Products Parameters
| Model |
10220 |
15220 |
20220 |
30380 |
40380 |
50380 |
60380 |
80380 |
100380 |
| DC input |
Input rating voltage ( VDC ) |
220 |
380 |
| Input rating current ( A) |
50.5 |
75.7 |
101 |
85.8 |
114.4 |
143 |
171.6 |
228.8 |
286 |
| Input DC voltage allowing range ( VDC ) |
187-300 |
335Vdc-650Vdc |
| AC output |
Output rating power ( kW ) |
10KW |
15KW |
20KW |
30KW |
40KW |
50KW |
60KW |
80KW |
100KW |
| Output rating voltage and frequency |
380 Vac, 50Hz |
| Output rating current ( A) |
15.2 |
22.7 |
30.3 |
45.5 |
60.6 |
75.9 |
91.1 |
121.5 |
151.9 |
| Output voltage precision (V ) |
AC380/220V±3% |
| Output frequency precision ( Hz) |
50±0.05 |
| Wave distortion ( THD ) (liner load ) |
<3% |
| Dynamic response (load 0 100% ) |
5% |
| Power factor ( PF ) |
0.8 |
| Overload ability |
150%,10 seconds |
| Crest factor ( CF ) |
03:01 |
| Inverted efficiency (80%resistance load) |
90% |
92% |
| Insulation strength (input and output) |
1500 VAC.lminute |
| Noise (lmeter) |
<50dB |
| Using condition temperature |
-25°C~ + 55°C |
| Humidity |
0-95% , no condensing |
| Altitude ( m ) |
<5000(0ver 1000 meters to reduce the using amount as GB/T3859.2) |
| Dimension (width, depth, height) mm |
580*510*1250 |
650*580*1500 |
520*1160*1370 |
600*1320*1490 |
| Protection function |
Input reversing protection, input low-voltage protection, output over-load protection, output short-circuit protection, over-heat protection |
Technical data of MPPT solar charger controller
| Tenical/Model TYC- |
100A96 |
50A220 |
100A220 |
150A220 |
50A380 |
100A380 |
150A380 |
| Controller electric specification |
Rated Voltage(V) |
96 |
220 |
380 |
| Rated Charge Current(A) |
100 |
50 |
100 |
150 |
50 |
100 |
150 |
| Battery max input voltage(V) |
120 |
300 |
500 |
| Max PV input voltage(V) |
200 |
550 |
750 |
| Max PV input power(W) |
10000 |
11000 |
22000 |
33000 |
19000 |
38000 |
57000 |
| PV array input control way |
1 |
1 |
| Charge method |
MPPT |
| Battery Equlization charge voltage(Vdc) |
115 |
247( cab be set) |
430( cab be set) |
| Self-consumption(mA) |
<300 |
| Communication |
RS485 |
| Rated Efficiency |
≥95% |
| Protection level |
IP20 |
| Operating environment |
Operating temperature |
-20ºC~+50ºC |
| Relative humidity |
<90% No condensation |
| Altitude |
2000m |
| Dielectric strength(Input & Output) |
1500VAC,1 mintues |
| Sound (1 meter) |
≤50dB |
| Protection function |
Input reverse protection, Input discharge protection ,Input over voltage protection ,Output Overload protection ,Input short-circuit protection, Over-heat protection |
| Chassis dimensions(width * lenth * height) |
482*420*222 |
540*500*910 |
482*420*222 |
540*500*910 |
2.6 Protection
Inverter has perfect protection function. Once appear faults, inverter will switch to invert mode or stop output, to protect itself and protect the load.
| Protect function |
Status |
Protective action |
Recovery |
| AC input overvoltage or undervoltage |
Voltage above or below the setting value |
Switch to invert output automatically |
After troubleshooting, inverter will automatically return to normal working condition. |
| DC input overvoltage or undervoltage |
Voltage above or below the setting value |
Stop output |
| Over-temperature |
Internal working temperature is too high |
AC input state: buzzing; DC input state: buzzing and stop output |
Rule out the reasons leading to high temperature, inverter will work normal. |
| Output overload |
load power is bigger than the rated power |
AC input mode: alarm and screen flicker;
DC input mode: alarm and stop output |
After troubleshooting, need to restart the inverter to back to normal working condition. |
When AC input undervoltage, inverter will automatically restart when the voltage is restored to above the protection setting value. If input voltage is between low voltage protection value and low voltage recovery value, inverter will stay in invert state and continue buzzing.
2.7 Operation environment
You should bear in mind the following points when positioning the inverter:
Place: No dust, no direct sunlight, dry, spacious ventilation
Keep away from the corrosive gas and liquid
Keep away from fire
Keep away from inflammable and explosive articles
Connection to safety power supply
Environment temperature: 0ºC~40ºC
Relative environment humidity: 10%~90% non-condensing
Payment Terms
| Payment Terms |
T/T |
EXW |
30% T/T in advance, paid the balance before shipment |
| FOB |
| CFR(C&F) |
30% T/T in advance, paid the balance against copy of B/L |
| CIF |
| L/C |
L/C amount above 50,000 usd, we can accept L/C at sight |
| West Union |
Amount lower than 5000usd |
| Paypal |
| Delivery time |
10 working days after receiving payment for one container |
FAQ
Q1: How to choose a right inverter?
A1:Tell us your demand, then our sales will recommend a suitable inverter to you.
Q2: What's the different between inverter and solar inverter?
A2: Inverter is only accept AC input, but solar inverter not only accept AC input but also can connect with solar panel to accept PV input, it more save power.
Q3: How about the delivery time?
A3: 7 days for sample; 25 days for bulk order.
Q4: What is the warranty of inverter?
A4: One year warranty on FGET-Solar product.
Q5: How to solve the technical problem?
A5: 24 hours after-service consultancy just for you and to make your problem to solve easily.
Audited Supplier 
){kind=link}
){kind=link}